Browse Month

June 2018

How Do You Know If You Need Air Compressor Repairs?

There’s a reason why we need to understand a lot of things about the products that we are buying, just like an air compressor. For instance, we should be able to see the signs of wear and tear in the product, follow the guidelines, read the product specifications, and know when to call for an expert when there is a problem that requires air compressor repairs. All these will save a lot of effort, money, and time in the long run.

But at some point, some people make the mistake of having their equipment repaired even though it’s not really needed. To prevent this from happening, here are some tips and things to know first if you really need to have your air compressor get repaired or not.

 

Do You Need Repair?

It is always a lot better to call in a service than to call for repairs. This is more beneficial for the core pieces of the machine like its air compressors that is used in different applications.

By doing this, you will not be leaving your machine out until the time that it breaks down, thus avoiding air compressor repairs and other unnecessary expenses.

First off, calling in service as soon as you see signs instead of doing it when you need it asap. You will able to tailor the timeline of repair that best suit you. It’s best that you do repairs when you will be needing the machine, instead of doing it while it is in high use. This is done to maximize the equipment’s efficiency and reduce possible downtime.

In addition, you will also be able to prevent the risk of total shutdown as you wait for your machine to be repaired. A machine that goes offline can lead to disastrous occurrences, especially in industries with competitive and strict deadlines to beat.

 

Know the Signs

Check your Manuals

Understanding your air compressor is very important. You need to check how long it recommends prior to servicing. This is because the majority of petroleum-based compressors should be changed every 500 hours and the synthetics around 2000.

In addition to this, you also need to check on your console on a regular basis in order to see if there are issues or errors that pop up. Although this seems simple, you will be surprised how often this is overlooked.

 

Excess Moisture

When your machine is running, moisture is accumulated and this should be reduced. If it produces excess condensation, then you might be having a fault in its automatic drain system.

 

Frequent Tripping Breakers

This can be a sign of a multitude of things. The first response to this is to immediately check the electrical circuit that powers the air compressor. But if you don’t find any fault but the system still keeps to trip breakers, then you need to call a professional to have it fixed.

 

High loss of Pressure or Low Overall Pressure

If the compressor has no pressure, it’s likely that it has reporting problems. Having low pressure is a sign of either ear and tear on its internal or external parts, reporting issues, or can be a simple technical issue.

At times it can be fixed easily but if you cannot easily spot the issue, you will be having huge losses in energy cost.

By being able to prevent a small problem from getting worse is very important in any industry. This will save the industry from unnecessary losses which could have been prevented.

Waterjet Cutting Melbourne: The Things You Need to Know

Waterjet cutting has been greatly beneficial in many applications in Melbourne. It is basically another way of cutting plastic, metal, stone and any other materials. It is, however, different from plasma and laser cutting. Waterjet makes use of high pressure cutstream of water and garnet to cut through a material. Due to its features, waterjet has become a vital part in many industries. But if you are not so familiar with it, you may wonder about the process involved behind it.

All About the Process

As mentioned, waterjet cutting has been popular in Melbourne and understanding the process behind will make one appreciate its use better. Primarily, the workpiece will be placed on top of the machine’s table. A series of clamps will be holding it in place. The operator will then communicate to a computer on what is supposed to be done. In such process that is pre-programmed and guided by a computer, the machine starts to blast through the workpiece. In this process, the water that cuts through gets reused and recycled. This makes the waterjet environmentally-friendly.

If the workpiece is thick, it can be expected that it will also take a longer time for it to cut through. Inherently, it is a slower process compared to laser cutting and working with thick materials lengthens the process even more. But its advantage is the fact that it can cut through a lot more substances.

 

How Does it Work?

The process will begin with a high-pressure pump. This pump can either be a direct drive pump or hydraulic intensifier pump. The latter is often used in industrial waterjet cutters wherein a series of hydraulic rams is responsible for increasing the pressure in the system to a given level. The water will then pass through a series of pressure gauges and valves before moving through the intensifier which will stimulate the force even more with the use of plungers.

When the water is ready to move to the nozzle area, it should pass through the jewel orifice. Typically, this orifice is made of precious gem like sapphire which is known to be highly-resistant to heat and pressure, as well as corrosion.

The jewel orifice focuses on the water stream downward through the nozzle. By this time, an abrasive inlet may allow grit to get through. The abrasive in this case will accelerate rapidly along with the water stream and help in the cutting process. Then the water stream will shoot downward and out of the nozzle- this is where the cutting process begins.

 

How About Its Benefits?

  •         It is a cold-cutting process
  •         Cuts in all directions
  •         May not require starting holes
  •         Cuts through almost any material
  •         Easily produces a finished product
  •         Environment-friendly
  •         Does not release dust or dangerous gas
  •         The machine’s programming is flexible
  •         Faster than any other traditional cutting methods

Waterjet is such as helpful machine that involves a process that should be understood deeply by whoever is using it. But one thing is for sure, having it around can yield great benefits.

 

Best Ways to Choose Land for Sale in Thornhill Park

Investing in Thornhill Park is one of the ways to earn more money. But for this to be possible, you should find the best and cheap land for sale. There is no question when it comes to land being an investment that does not depreciates, thus investing in it will not disappoint you. But it’s all not about purchasing a piece of land. Below are some of the things that you should know first prior to deciding on a piece of land that will be worth your investment.

 

The Rules You Should Know

 

Location

If you are in Thornhill Park and is looking for land for sale, the primary rule will always be location. It’s not easy to find cheap land in some urban areas that has already grown. However, this should not mean that you just opt for a land that has is situated in an area with no good access to roads. It’s important that you take your time when looking for the right listing that is strategically located. The least that you can do is to make sure that the land has the potential to grow.

 

Geography and Climate

Geography and climate are two other important things that should be taken into consideration. When it gets too cold or too hot in some seasons, such may not be a good deal, especially if you have plans on building something in the land.

 

Profitability

Another factor to consider is the profitability of any hunting or farm land for sale. Yes, land is not known to depreciate, but it can take some time before it translates to profit. At the same time, you need to find land in an area that has so much potential for growth. This is because growth equates to land price increase. Regardless if you have plans of selling it or not, it will be very comforting to know that someday you will be getting profit from selling the land that you invested in.

 

Market

Sticking to the proven market, instead of buying land in an area that is hardly known is more important. It won’t make sense when you buy from out of the country as it’s likely that decades will pass it can actually grow. The best thing you can do is to buy land in a location that already has proven some growth, before others seize the opportunity.

 

When a buying cheap land for sale, bear in mind that the seller will always have a sales pitch ready. He or she will try to get you to purchase that piece of land. Remember to take some time and think about it thoroughly before the buying decision. If having any doubts, don’t just ignore them. Anyway, you can always look for land somewhere else.

 

5 Tips to Help You Choose the Best Digital Marketing Agency

Many people think that digital marketing is easy as it only takes being on the internet. But in reality, it takes more than that. You will only realize this when you have experience a loss as a result of doing it on your own. Any strategy will have the tendency to fail and you might end up losing much money. Thus, it would be better if you leave it to the experts by hiring a digital marketing agency. Listed below are some tips that will help you in choosing the right agency.

How to Choose the Best Marketing Agency

 

1. Defining Your Goals

It is understandable that it is difficult to decide on your targeted digital marketing campaign, especially if you don’t have any idea of your targets. Have you decided on how much traffic you need to get every month? Or, do you need to be on the first position on SERP? With all these, see to it that your digital marketing agency can offer you all the possible options.

2. Price is not really a deal breaker

There is no question that you need consider price when it comes to choosing a marketing agency, more so if you have not enough budget. But, you may also want to bear in mind that price is not really a deal-breaker. However, you need to make sure you don’t hire one just because it is the cheapest agency available.

3. Get Answers

After getting out from the agency, ask yourself if you were able to get answers from them and if you are satisfied. If there’s confusion, the it’s a sign that you should look for other agencies. Be sure that you don’t hire an agency that is not capable of giving you satisfying answers.

4. Always Remember the Expert

When there are meetings, it is the time that you will be getting answers from the managers of the agency. But, you also need know that they are not the ones who’s going to work on your projects. Thus, you need to have a talk with the experts who will be handling your projects when you hire.

5. Ask for references

When you are hiring a digital marketer, you need to make sure that they can handle your account well. For this, it would be that you ask for references and should get in touch with the other clients face to face. If the clients say have good things to say about the agency, then, you should invest and hire them.

These tips, if you apply them properly will be very beneficial for you and your business. Having the right agency can make or break your business, thus, be sure that you are in the right hands.